Repair and Prepare Stone Slabs for Finishing
A stone-processing workshop needs to assess more than the appearance of a crack. Its depth, continuity, cleanliness and effect on slab integrity influence whether the material can be processed and what treatment is appropriate.
The intended workflow for KD-015 is fabrication-stage repair followed by a confirmed finishing process. Review representative pieces before deciding how the resin will be used across a production batch.
Запросы дистрибьюторов и соответствующие требования к оптовым заказам
| Основные направления применения | Stone slab resining and defect repair |
|---|---|
| Подробная информация о выборе | Defects · backing process · grinding requirements |
| Требования к заказу | Подтвердите указанные сорт, цвет, упаковку и количество |
Запросите актуальную инструкцию по эксплуатации изделия и подтвержденные технические характеристики поставки для вашей области применения.
The domestic listing covers small surface defects in stone processing and glass-fiber mesh reinforcement of fragile slabs. For a production enquiry, distinguish surface filling from through-crack repair and mesh backing; the preparation, support and acceptance requirements are not identical.
Do not assume that resin treatment makes a damaged slab safe to lift, transport or install. Handling plans and any load-bearing application require their own assessment. This page does not approve facade anchoring, structural concrete injection or building-strengthening work.
Approve both the repair and the surrounding stone appearance on the trial piece. A transparent resin does not establish an invisible result on every stone. Do not represent the product as universally non-yellowing, food-contact approved or suitable for every exposure without the relevant evidence.
Separate visual acceptance from performance requirements. A repaired face can look acceptable while the slab still needs further assessment for handling or installation.
Перед выбором поставляемого сорта ознакомьтесь с материалами и областью применения.
This is a planning overview. Obtain the actual component labels, SDS and approved processing instructions before use.
Pigment use requires confirmation of the approved paste, dose basis and sequence. Do not improvise solvent dilution or heating of resin batches. Any heated industrial process requires product-specific instructions, suitable equipment and a reviewed safety procedure.
This page concerns treating stone during fabrication. Bonding a slab to a building substrate is a different application with different requirements. Do not select a resin solely because both products contain epoxy.
No. Weight and volume ratios are not interchangeable without component-density information and an approved conversion. Use the measurement basis stated for the actual supplied product.
Discuss the specific slab, mesh and backing process with KEDA. A catalog application does not establish compatibility with every mesh or authorize a structural design. Evaluate the complete process before production.
Ask for the approved paste and addition instructions for the supplied grade. Approve the finished sample and preserve the resin–hardener proportion. Do not apply a percentage taken from a different resin system.
No such guarantee is made. Check the dry, finished sample against an untreated reference, paying attention to repaired areas, margins and the effect of previous treatments.
No. Pot life, handling readiness, machinability and full cure are different stages. Confirm the criteria for each step rather than treating one published time as approval for all operations.
Send KEDA the stone type, defect photographs, slab dimensions, previous treatments and intended repair process. Include whether mesh backing is required, the finishing sequence and expected production volume. Supply details and process suitability should be confirmed before quotation and use.
KEDA KD-015 Epoxy Resin for Stone Slab Repair
