Start a stone-care inquiry with the result the customer wants: protection against particular staining risks, deeper existing color, or a different level of gloss. Then assess the surface. A dull floor, a pale stone panel and an absorbent countertop can require different products and processes.
A penetrating sealer, color enhancer and polishing treatment answer different questions. Some formulations combine functions, but the product name alone does not establish the protection, appearance or compatibility of the complete treatment.
This guide helps fabricators, distributors and maintenance teams identify the task, compare treatment categories and approve a representative trial before treating the main surface.
Define the Concern Before Choosing a Product
Describe What Has Changed
Ask whether the customer is describing a new surface or a change during service. Record the stone name, finish, previous treatments, cleaning history, exposure and the appearance they want to retain or change.
Distinguish dirt or cleaner residue from a stain within the surface, an etched area or physical wear. Photographs under normal and angled lighting can support the discussion, but similar-looking marks may need different assessment.
| Customer concern | First assessment | Treatment direction to investigate |
|---|---|---|
| Concern about future liquid staining | Stone receptivity, existing treatment and the actual staining agents | A suitable protective treatment, with its specific performance confirmed. |
| Stone looks too pale but its texture is liked | Desired tone, existing finish and acceptance of a color change | A compatible color enhancer and a cured appearance sample. |
| Floor looks dull or uneven | Cleaning film, coatings, wear, etching and current finish | Cleaning, gloss maintenance or restoration, according to the cause. |
| A localized dark mark has appeared | Likely source, moisture history and whether the mark is a stain | Targeted assessment and cleaning or stain treatment before enhancement or sealing. |
| Scratches, etched patches or damaged edges are present | Nature and extent of the damage | A repair or restoration process before selecting a finishing treatment. |
| Discoloration returns or moisture comes from below | Source and path of the moisture | Investigation of the underlying condition, rather than simply adding a surface product. |
Use this as a starting framework, not a diagnosis from appearance alone. Existing problems should be understood before they are covered by another treatment.
Separate Color, Gloss and Protection
A dark matte stone can have strong color without a mirror-like reflection. A pale polished marble can have high gloss while remaining light in color. Protective performance is another characteristic and needs evidence relevant to the proposed use.
For example, a customer who likes a honed finish but wants help with staining risks has not asked for greater shine. A customer who wants a richer slate tone has not necessarily asked for polishing. Write those preferences into the inquiry before comparing products.
When a Penetrating Stone Sealer Is the Right Question
Identify the Protection Needed
A penetrating stone sealer is selected to help manage specified staining risks on a compatible receptive surface. Ask which liquids, exposure conditions and maintenance practices matter. Water-related behavior and oil-related staining protection need separate confirmation for the actual product.
KEDA SC100 Penetrating Stone Sealer is positioned for protective treatment of compatible absorbent stone. Selection starts with the material, finish, existing treatment and intended service.
Check whether the surface needs and can accept the proposed treatment. Dense, coated or previously treated surfaces should not be assigned the same application as an untreated absorbent stone merely because both are sold as stone.
Keep Protection Separate from Restoration
Sealing does not make a surface stain-proof, and routine spill removal remains necessary. It also does not repair an existing scratch, remove a stain or establish protection against acid etching on sensitive stone.
An impregnating treatment is different from construction waterproofing or a joint sealant. Water entering through a construction defect or from behind the stone needs its own investigation. Specify the surface-protection objective clearly so it is not mistaken for solving every moisture problem.
When a Color Enhancer Is the Right Question
Approve the Intended Color Change
A color enhancer is selected when the customer wants to enrich the stone’s existing tones or visual character. Assess the actual stone and finish, including previous resin, sealer or coating. Color enhancement is not a promise to turn unrelated slabs into an identical shade.
KEDA SC200 Stone Color Enhancer is positioned for this appearance objective on compatible absorbent stone. Use a representative sample and an untreated reference to agree the result after the required curing and cleanup stages.
Check the full range of relevant stone pieces. Natural variation may remain visible or become more pronounced, and a small selected area may not represent a whole panel or floor. Obtain approval under the lighting in which the surface will be used.
Do Not Equate a Wet Look with Gloss
A deeper or wet-look appearance describes color. It does not independently establish a polished surface, protective performance or a waterproof assembly. Some enhancing formulations also provide protective functions; confirm those functions for the selected grade rather than assuming them from the category.
Resolve stains, uneven dampness and residue before deciding whether enhancement is appropriate. Adding enhancer to disguise an unexplained mark can make later evaluation more difficult. Treat the color change as something to approve before full application, without assuming it will be easy to reverse.
What Does the Customer Mean by Polish?
Distinguish the Process Behind the Word
“Polish” can refer to mechanical surface refinement, a professional crystallization-maintenance treatment or a wax-based finishing product. These methods use different materials and equipment, and they do not provide interchangeable repair or protection claims.
Assess the existing surface before choosing a gloss treatment. A residue film may need suitable cleaning. Worn, scratched or etched stone may need professional restoration. A maintenance product should not be selected solely because the customer asks to “make it shiny again.”
Match the KEDA Product to Its Intended Method
KEDA SC500 Marble Crystallizer & Polish is positioned for professional gloss maintenance on compatible marble floors. Review the floor material and condition together with the proposed machine, pad and working method.
KEDA Stone Polishing Wax is a separate paste-wax finishing option for specifically approved stone surfaces. Evaluate application, buffing, residue and the intended service rather than treating it as the same process as crystallization.
| Product direction | Main selection objective | What to evaluate before specifying it |
|---|---|---|
| SC100 Penetrating Stone Sealer | Surface protection for compatible absorbent stone | Receptivity, stated protective functions, appearance and maintenance. |
| SC200 Stone Color Enhancer | Deeper existing color and visual character | Cured tone, uniformity, existing treatment and any separately required protection. |
| SC500 Marble Crystallizer & Polish | Professional marble-floor gloss maintenance | Floor suitability, preparation, machine, pad, cleanup and readiness for use. |
| Stone Polishing Wax | A wax-based appearance finish | Approved surface, application and buffing method, residue and service requirements. |
These are selection directions within the KEDA range. The actual supplied product and sample process establish the method and scope; the table is not a fixed treatment sequence.
Check the Surface Before Planning the Treatment
Record Material, Finish and Existing Layers
Identify the stone as accurately as possible and record whether it is polished, honed, brushed or otherwise textured. For engineered stone, sintered surfaces or terrazzo, identify the actual material system and follow the relevant manufacturer’s care requirements.
Ask what has already been applied: sealer, enhancer, wax, coating, resin treatment or maintenance product. A previous layer can affect absorption, appearance and the next process. When the history is unknown, record that uncertainty and investigate it before prescribing a combination.
Prepare a Representative Surface
Choose cleaning and preparation for the stone, existing finish and type of contamination. Remove residues and allow the required drying conditions before trialing a treatment. Keep unresolved stains, damage and active moisture problems outside a routine finishing proposal.
Avoid using a generally described acid cleaner as the default preparation for marble or another acid-sensitive surface. Also confirm protection for adjacent metal, glass, joints and finishes. Use the supplied safety information and the approved working procedure for the actual treatment.
Do Not Assume the Products Form a Ready-Made System
SC100, SC200, SC500 and wax have different selection objectives. Do not automatically specify them as successive stages. If a customer needs both enhancement and protection, ask whether one approved formulation can provide the required combination or whether a specifically assessed sequence is needed.
Record preparation, product order, application conditions and the permitted interval before any follow-on treatment. Trial the complete proposed system, including existing layers. Do not mix products together or add extra coats to force a darker or glossier result outside the instructions.
For a floor, assess service requirements separately from appearance. A shiny result does not prove suitable traction. Likewise, a product selected for decorative stone does not automatically establish food-contact suitability, outdoor durability or use on adhesive-bonding faces.
Approve the Complete Sample Process
Define Acceptance Before Application
Use a spare piece or a suitable discreet area that represents the actual stone, finish and preparation. Keep an untreated reference where appropriate and identify the sample so product and process records remain linked.
Agree what the customer will accept: color depth, gloss, uniformity, residue and the required protective or service behavior. Include the applicator, machine or buffing method where relevant. A sample that omits the intended cleanup stage does not reproduce the complete treatment.
| Sample check | What to record | Decision it supports |
|---|---|---|
| Surface identity | Stone, finish, existing treatment and preparation | Establishes which surface the result represents. |
| Treatment method | Exact product, application sequence, equipment and conditions | Makes the evaluated process identifiable. |
| Final appearance | Color, gloss and uniformity after the required cure or finishing stage | Supports approval of the intended look. |
| Cleanup and residue | Excess removal, haze, streaks and deposits at edges or joints | Shows whether the complete finish is acceptable. |
| Required performance | Product-appropriate checks agreed for the staining risk or intended use | Separates appearance from evidence of protection or service suitability. |
| Maintenance and release | Care method, readiness for use and any follow-up observation | Connects the sample to practical service and purchasing decisions. |
Judge the Finished, Cleaned Surface
Compare the sample under consistent lighting once the required process is complete. Fresh wetness can change color and reflection, so it is a poor substitute for the cured or finished appearance. Review the edges and surrounding area as well as the most attractive central patch.
When protective performance matters, agree a relevant evaluation with the supplier. A water-beading observation alone does not establish oil-stain resistance, acid resistance or every future exposure. Preserve the accepted sample record with any limitations and required care.
Connect Selection with Supply and Maintenance
For a project inquiry, send the stone, finish, current condition, previous treatments, photographs and desired result. Add area, location, exposure, available equipment and the permitted working window. These details help separate a protective-treatment request from a restoration or gloss-maintenance job.
Before purchase, confirm the actual grade, packaging, instructions and safety documents. Establish consumption from the approved trial and method rather than borrowing another product’s coverage rate. Keep later treatment decisions tied to condition, exposure and maintenance records instead of an invented universal reapplication interval.
Distributors can use the KEDA Stone Care range to organize inquiries by customer task. Keep the accepted use and method with sales information so a product recommended for one surface is not presented as a universal treatment for every stone.
Часто задаваемые вопросы
1. Will a stone sealer make marble glossy?
Select a penetrating sealer for its confirmed protective purpose. Evaluate any appearance change on a completed sample. A sealer should not be specified as a substitute for the polishing or restoration process needed to achieve a particular finish.
2. Is a color enhancer the same as a sealer?
Enhancement describes an appearance objective; sealing describes a protective objective. Some formulations combine functions. Check the actual product’s stated capabilities and trial the surface instead of assuming every enhancer has the same protection.
3. Can polish remove scratches or acid etching?
Identify the damage and the process being proposed. A gloss-maintenance or wax product does not by itself establish damage removal. A specialist may need to repair, hone or repolish the surface before a maintenance treatment is appropriate.
4. Can SC100, SC200 and SC500 be used together?
They are not an automatically approved sequence. Confirm compatibility, preparation and order for the actual surface and products, then assess the complete trial. Include existing coatings and the intended cleaning and maintenance routine.
5. How often should a treatment be repeated?
Use the supplied guidance and inspect the surface in service. Traffic, exposure, cleaning and existing layers affect the decision. Determine why appearance or performance has changed before adding more product.
Discuss the Surface Goal with KEDA
Tell us whether the priority is protection, deeper color or gloss, and describe the surface condition and previous treatment. Связаться с KEDA with those details to discuss the product direction and sample process for your project.
