TILE ADHESIVE SOLUTIONS
Tile Installation
Select for the tile. Plan for the substrate. Explore the KEDA tile adhesive range and discuss the materials, installation area and requirements of your market or project.
For overseas distributors, tiling contractors & installers
Tile type · Size · Absorption
START WITH YOUR MATERIAL
The right discussion
starts with the tile.
Tile appearance and dimensions are only part of the selection. Include water absorption, backing, substrate and the installation location.
Absorbent ceramic tiles
Start with the tile specification and a sound mineral substrate. Review the interior wall or floor location before discussing the adhesive.
Ceramic tiles and mosaics
Share the tile backing, mosaic material and substrate preparation. Review thin-bed installation on suitable interior surfaces.
Porcelain and larger formats
Low water absorption, thin panels and larger dimensions need a product-specific review. Share the actual tile specification and installation system.
EXPLORE THE KEDA RANGE
Three product discussions.
One installation brief.
Build your enquiry around customer applications. Match each product to the actual tile and substrate rather than choosing by model number alone.
C99
Cementitious
Tile Adhesive
Explore an interior ceramic-tile option. Share tile absorption, dimensions and the prepared mineral substrate before ordering.
C110
Thin-Bed
Tile Adhesive
Review thin-bed installation of absorbent ceramic tiles and suitable ceramic mosaics on prepared interior substrates.
C210
Polymer-Modified
Tile Adhesive
Discuss polymer-modified adhesive for interior tiling. Confirm the tile specification, size and installation conditions.
PRODUCT FOCUS
C210 Polymer-Modified
Tile Adhesive
Discuss C210 for interior tiling within the selected product’s tile specifications. Water absorption, dimensions and backing help establish whether the tile falls within its application scope.
- Product focus
- Polymer-modified tile adhesive
- Application discussion
- Interior tiling on suitable prepared substrates
- Selection starts with
- Tile water absorption, dimensions and backing
- Order details
- Destination market, packaging and expected quantity
For porcelain, sintered slabs or an installation outside the stated tile limits, share the material specification for a separate product recommendation.
TILE TO ADHESIVE DISCUSSION
Share the specification.
Refine the selection.
Use this guide to start an enquiry. Confirm the selected product’s suitability for the actual installation before ordering.
| Application | Product discussion | Information to share |
|---|---|---|
| Interior absorbent ceramic tile | C99 enquiry | Tile water absorption, dimensions, wall or floor location and prepared substrate. |
| Interior ceramic mosaic / thin-bed work | C110 enquiry | Mosaic material and backing, substrate condition and installation method. |
| Interior tile specification review | C210 enquiry | Measured absorption, dimensions, backing and the supplied product’s application limits. |
| Porcelain, slabs or special conditions | Product selection review | Tile specification, exterior or heated areas, immersion, substrate system and project requirements. |
Plan the complete tiling system.
Include substrate preparation, any required waterproofing, adhesive bedding, grout and movement joints in the installation plan. Correct significant unevenness before tiling.
INSTALLATION PLANNING
Good preparation.
Consistent bedding.
These planning steps connect product selection to the site. Use the instructions supplied with the selected adhesive for the actual application.
- 01
Prepare & assess
Check the tile and substrate. Correct weak or uneven areas and confirm any primer or waterproofing requirements.
- 02
Mix as specified
Use the supplied product instructions for water, resting and remixing. Keep the mixture within its working period.
- 03
Spread & check contact
Comb straight ridges, coat the tile back as required and check bedding. Place tiles before the adhesive skins.
- 04
Protect & finish
Keep the installation undisturbed for the specified setting period. Plan grouting, movement joints and return to service.
TILE INSTALLATION QUESTIONS
Before you enquire.
Can I choose the adhesive by tile size alone?
Include the tile type, water absorption and backing as well as its dimensions. The substrate, wall or floor location and service conditions also guide selection. Send the tile specification with your enquiry.
Does C210 automatically suit every porcelain tile or slab?
Review the actual tile specification against the selected product’s application limits. Low-absorption porcelain, sintered slabs and larger formats need a separate suitability review. A model number or polymer-modified description does not establish an international performance classification.
Can tile adhesive replace levelling or waterproofing?
Prepare a sound substrate and correct significant unevenness before tiling. Where the design requires waterproofing or other preparation, include the appropriate products in the system. Confirm compatibility with the selected adhesive.
Can distributors enquire across the whole range?
Yes. Describe the tiles commonly used by your customers, the destination market, packaging preferences and quantities. KEDA can discuss C99, C110 and C210 for your range. Minimum orders and supply terms are confirmed for the specific enquiry.
LET’S DISCUSS YOUR TILE ADHESIVE RANGE
Bring your tile specification.
Start your next enquiry.
Tell us the materials your customers use, your destination market and expected quantities. Explore the KEDA tile adhesive range for your business or project.
Distributor enquiries · Qualifying bulk orders