Surface Protection Starts with the Right Treatment
KEDA SC100 is a penetrating stone sealer intended for compatible absorbent stone surfaces. It is positioned for stone fabricators, installers and maintenance teams selecting a protective treatment for a specific material and finish.
A successful treatment starts with identifying the stone, checking its condition and testing the proposed application. Do not assume that every stone surface needs, or can absorb, a penetrating sealer.
Distributor enquiries & qualifying bulk orders
| Application focus | Protection of compatible absorbent stone |
|---|---|
| Selection details | Stone absorption · finish · previous treatment |
| Order requirements | Confirm supplied grade, colour, packaging and quantity |
Request the current product instructions and confirmed supply specifications for your application.
Confirm suitability for each material and exposure. Engineered stone, resin-treated surfaces and exterior installations require separate assessment. Food-contact use is not established by this page.
SC100 is positioned as a surface-protection treatment, not a stain remover, crack repair material or polishing product. Existing stains, etching and surface damage need to be assessed before sealing.
A penetrating sealer is not a replacement for construction waterproofing. Do not rely on this product to seal joints, bridge cracks or correct moisture entering from behind the stone.
Review the materials and application before choosing the supplied grade.
Follow the instructions and safety information supplied with the confirmed product. This overview does not specify dilution, coverage, coat count or curing time.
Identify the stone and finish. Check for previous coatings, resin treatments, contamination and moisture problems. Confirm that the surface can accept the selected treatment.
Use a cleaner suitable for both the stone and the existing surface condition. Remove cleaning residues and allow the surface to dry as required by the product instructions. Do not seal over unresolved stains or active moisture problems.
Test an inconspicuous area or representative spare piece. Allow the specified curing period, then assess appearance and the required protective effect. Check for uneven darkening, residue or changes in finish before proceeding.
Use an approved applicator and work in manageable sections. Follow the specified application rate and sequence. Remove unabsorbed excess within the permitted working period; do not leave surplus material to dry as a surface film. Do not dilute or mix with another product unless instructed.
Keep the treated area free from water, contamination and traffic for the specified period. Clean spills promptly after the surface returns to use. Follow a suitable maintenance routine and reassess the surface before deciding whether further treatment is needed.
No. It is positioned as a penetrating treatment for stone surfaces, not a material for filling movement joints or bonding stone pieces.
No. Sealing should not be presented as complete stain prevention. Prompt spill removal and suitable maintenance remain important.
No acid-etch protection is established here. Acid damage is different from liquid absorption or staining. Keep acidic substances and unsuitable cleaners away from acid-sensitive stone.
Appearance depends on the actual treatment and surface. SC100 is not positioned as a colour enhancer or polishing product, but unchanged colour and gloss must not be assumed. Evaluate a fully cured trial area first.
Do not assume suitability. Follow the surface manufacturer's care instructions and confirm whether treatment is needed and compatible. Some dense, coated or resin-treated surfaces may not accept a penetrating sealer.
Determine consumption from a representative trial and the confirmed application instructions. Reapplication depends on the product, surface, exposure, wear and maintenance. No fixed coverage or service interval is specified here.
Send KEDA the stone name, surface finish, existing treatments, approximate area and exposure conditions. Include photographs or a representative sample where available, together with the required protection, destination market and estimated quantity.
KEDA SC100 Penetrating Stone Sealer
