STONE & PANEL INSTALLATION SOLUTIONS
Stone Cladding
& Panel Installation
Explore KEDA epoxy adhesives for stone cladding interfaces and interior large-format panel installation. Choose the product for the materials, bonding faces and specified installation system.
For overseas distributors, professional installers & contractors
Stone · Support · Installation system
START WITH THE INSTALLATION
Two directions.
Two product choices.
Stone-to-support bonding and interior slab installation have different requirements. Begin with the actual assembly.
Stone and support interfaces
Discuss bonding at stone-to-metal interfaces, stone component joints and specified rigid mineral substrates. Confirm the actual materials and fixing arrangement for each project.
Porcelain slabs & sintered stone
Explore the white slab adhesive for indoor ceramic large-format slabs and sintered-stone panels. Share the slab backing, substrate, dimensions and intended installation area.
OUR CORE INSTALLATION PRODUCT
2-Component Epoxy
Structural Adhesive
Two-component epoxy adhesive for professional stone-cladding and bonding enquiries. Select the grade for the stone, support material and project requirements.
- Typical component colours
- Part A: BeigePart B: Grey
- Additional colour option
- Pure white option available
- A:B mixing ratio
- 1:1 by volumeMeasure equal volumes of Part A and Part B.
- Packaging
- Separate A/B packs. Confirm the required capacity and order quantity.
Colours shown are indicative; confirm the required version against actual samples. Project design governs mechanical supports, adhesive contact areas and fixing arrangements.
FOR INDOOR LARGE-FORMAT PANELS
Low-Odor Epoxy
Slab Adhesive
White epoxy slab adhesive for indoor ceramic large-format slabs and sintered-stone installation enquiries.
- Colour
- White
- Materials
- Ceramic / porcelain slabs and sintered stone
- Installation area
- Indoor installations, including decorative wall panels
Describe the slab size, thickness, backing treatment and substrate. Confirm the installation method, packaging and product instructions for the actual project.
Residential & commercial interiors
MATCH THE BONDING FACES
What is being bonded
to what?
Use the interface to guide your enquiry. Compatibility and suitability must be confirmed on the actual assembly.
| Bonding interface | Product to discuss | Information to share |
|---|---|---|
| Stone → metal support | Structural adhesive selection | Stone type, metal finish, surface preparation and the specified bracket / fixing design. |
| Stone → stone or rigid mineral substrate | Structural adhesive selection | Both bonding faces, surface treatment, joint geometry and service conditions. |
| Interior porcelain / sintered panel → support or substrate | Interior slab adhesive selection | Slab thickness and backing, substrate condition, panel dimensions and installation method. |
The adhesive is part of the installation system.
For cladding and load-bearing assemblies, suitability must be assessed for the project. Follow the specified mechanical supports and fixings, surface preparation and adhesive contact design.
PREPARE YOUR PROJECT ENQUIRY
Four details for
a useful discussion.
Distributors can share customer applications. Installers and contractors can provide a project drawing or clear interface photographs.
- 01
Panel & material
Slab or stone type, size, thickness, surface finish and backing.
- 02
Bonding interface
Support / substrate, joint detail and project fixing arrangement.
- 03
Service conditions
Indoor or outdoor location, exposure and installation area.
- 04
Market & order
Destination market, product version, packaging request and quantity.
INSTALLATION QUESTIONS
Before you specify.
Which product should I discuss for interior porcelain or sintered-stone slabs?
Start with Low-Odor Epoxy Slab Adhesive for indoor ceramic large-format slabs and sintered-stone installation. It is available in white. Share the backing, substrate, panel size and fixing arrangement to confirm the relevant grade and method.
What are the structural adhesive component colours and mixing ratio?
Part A is typically beige and Part B grey; a pure white option is also available. For 2-Component Epoxy Structural Adhesive, the A:B ratio is 1:1 by volume. Confirm the supplied version and use its product-specific instructions.
Can the adhesive replace the specified brackets or mechanical anchors?
Follow the project installation design. Adhesive selection does not establish a replacement for specified brackets, anchors or supports. Cladding and load-bearing applications require assessment of the complete assembly.
What are the pack sizes and minimum order quantities?
The structural adhesive image shows 10L Part A and 10L Part B packs. Confirm the actual packaging options, colour version and minimum quantity for your enquiry. Distributor arrangements and qualifying contractor orders are discussed for each order.
LET’S DISCUSS YOUR INSTALLATION
Find the product for
your panel and interface.
Share the materials, installation system and expected quantity. Discuss KEDA structural and interior slab adhesives for your market or project.
Distributor enquiries · Qualifying contractor orders