Interior slab focus
For indoor porcelain and sintered-stone wall-panel enquiries.
For interior porcelain slabs & sintered-stone panels
White, two-component epoxy adhesive for indoor ceramic large-format slabs and sintered-stone wall panels. Discuss the slab backing, substrate and specified installation system for your project or distribution range.
For overseas distributors, interior installers & contractors.
For indoor porcelain and sintered-stone wall-panel enquiries.
A white option for the selected slab installation.
Plan the work with the ventilation and safety measures in the supplied instructions.
Use the matched A/B components and the supplied mixing instructions.
| Adhesive family | Two-component epoxy slab adhesive |
|---|---|
| Available colour | White |
| Application focus | Indoor porcelain slabs and sintered-stone wall panels |
| Components | Matched Part A and Part B |
| Pack format | Separate A/B packs; confirm required order capacity |
| Installation selection | Actual slab, backing, substrate and specified fixing system |
Use the ratio and measurement basis stated for the actual supplied grade. Confirm working time and curing requirements before installation.
Review indoor ceramic large-format wall slabs, their backing treatment and the supporting substrate.
Discuss decorative wall panels in residential interiors and commercial spaces.
Assess the existing substrate, coatings and support conditions before selecting the installation system.
Share the exact slab, dimensions, thickness and backing layer, plus the substrate and planned fixing arrangement. Confirm compatibility on the actual materials; a surface finish or factory-applied mesh or resin backing can change the bonding interface.
Slab type, dimensions, thickness, weight and factory-applied backing or surface treatment.
Substrate condition, bonding faces, installation height, specified fixings and temporary supports.
Supplied mixing instructions, allowed working time and the conditions for loading or removing support.
The product gallery shows the existing A/B packaging. Confirm the order capacity and supplied components with KEDA.
White adhesive for indoor porcelain-slab and sintered-stone wall-panel enquiries. Begin with the slab backing, substrate and installation area.
Your current product selectionReview the structural epoxy product for stone-to-support bonding and project-specified rigid interfaces.
Each product has its own mixing instructions and installation requirements.
Explore Structural Epoxy AdhesiveInspect the slab, backing and substrate. Prepare sound, clean, dry bonding faces; remove dust, oil and loose material and assess coatings.
Follow the ratio and measurement basis on the supplied product label. Use separate tools for the components; mix thoroughly in a clean container, scraping the sides and bottom. Similar component colours can make incomplete mixing difficult to identify.
Apply at the designated contact surfaces and position the panel within the permitted working time. Follow the specified bonding area, thickness, mechanical fixings and temporary supports.
Keep the panel supported and undisturbed while curing. Follow the supplied product instructions and installation requirements before loading or removing temporary support. Surface hardness alone does not confirm readiness.
Prepare manageable batches. Use the matched components without added water, solvent or extra hardener. Follow the product-specific safety instructions for both components.
This product is available in white. Approve a representative sample with the actual slab and backing where appearance is important.
Yes. This page focuses on indoor ceramic large-format slab and sintered-stone wall-panel installation enquiries. Select the grade and installation system for the actual slab, backing and substrate.
Use the ratio and measurement basis on the instructions for the actual supplied grade. Confirm both with KEDA before use. Do not copy the ratio from another epoxy product or infer it from the capacities of the containers.
The dry-fixing method described here is not recommended for bathroom or shower installation. Discuss a suitable tile adhesive, waterproofing and installation system for the actual wet-area project separately.
No. The product name does not establish zero VOC, a certification or suitability for unventilated work. Follow the supplied safety information and ventilation requirements.
Samples can be provided free of charge, with freight paid by the customer. This core product uses the KEDA brand. Share your market, required capacity and quantity to confirm English packaging and order arrangements.
Share your slab material, dimensions, backing, substrate and installation area. Tell us your destination market and estimated quantity to discuss the suitable grade and supply configuration.
KEDA Low-Odor Epoxy Slab Adhesive