Mounting Adhesive for Interior Panels and Trims
KEDA High-Tack Mounting Adhesive is intended for non-structural interior fit-out work where initial holding is an important selection requirement. Discuss the materials and installation detail with KEDA to select an appropriate product and application method.
Distributor enquiries & qualifying bulk orders
| Application focus | Interior panels, skirting and trims |
|---|---|
| Selection details | Panel material · weight · bonding area |
| Order requirements | Confirm supplied grade, colour, packaging and quantity |
Request the current product instructions and confirmed supply specifications for your application.
Initial grab describes the adhesive's early holding behaviour. It does not establish the finished assembly's safe working load or mean the adhesive has fully cured.
Required support depends on the component, its weight and shape, the available bonding area and the actual surfaces. Retain mechanical fixings where the installation design requires them.
A bond to paint or a decorative film relies on that layer remaining attached to its substrate. Loose paint, weak plaster and poorly bonded finishes must be addressed before installation.
Provide details of coatings, plastic films and surface treatments. Assess compatibility on representative materials; do not assume that a result on one grade of plastic, stone or painted surface applies to another.
Review the materials and application before choosing the supplied grade.
Follow the instructions supplied with the actual product and the component manufacturer's installation requirements.
Read the actual product's safety information. Provide ventilation and use the protective equipment specified for the adhesive and any surface-preparation products.
Not automatically. Follow the assessed fixing design and supplied instructions. High initial grab is not a blanket replacement for temporary support or permanent mechanical fixings.
No general load rating is assigned here. The actual materials, bond area, load direction, component geometry, curing conditions and service environment must be considered. A laboratory strength value is not, by itself, an installation load limit.
Do not assume so. Mirror coatings and safety films require specific compatibility assessment and an appropriate fixing design.
Provide the exact panel or stone specification, including surface films, coatings and treatments. Compatibility and any risk of surface changes must be assessed for the selected product and materials.
These properties have not been established for the proposed KEDA product. Confirm the intended paint system or exposure conditions before selecting it for that use.
Send the component and substrate materials, surface finishes, dimensions, weight, proposed bond layout and installation conditions. Include the estimated quantity and destination market so KEDA can review the requirements and confirm available product options before quotation.
KEDA High-Tack Mounting Adhesive
