STONE WORKSHOP SOLUTIONS
Stone Fabrication
& Repair
Explore KEDA adhesives for stone bonding, fabricated edges and local repair. Start with our Knife Grade Polyester Marble Adhesive, with colour paste for matching joints and repairs.
For overseas distributors, stone fabricators & contractors
Bonding · Edge assembly · Local repair
THE WORK COMES FIRST
From the joint
to the finished edge.
These are application starting points. Confirm the KEDA grade against your material, joint and service conditions.
Countertop joints
Discuss close-fitting joints in countertops, vanity tops and decorative stone pieces. Stone type and the desired joint appearance guide the choice.
Edge assembly
Review laminated edge strips, bonded stone details and mitered edges. Share both bonding faces, joint geometry and the finished profile.
Local filling & repair
Discuss small chips, cavities and local defects in workshop stone finishing. Select the adhesive and colour for the actual stone and repair area.
Which material are you working with?
Marble and other natural stone · Engineered quartz · Porcelain and sintered stone
Discuss the exact stone or slab, finish and surface treatment. Material compatibility, including staining on light or porous stone, needs a trial on the actual material. Sintered stone follows its own product selection.
OUR CORE FABRICATION PRODUCT
Knife Grade Polyester
Marble Adhesive
Knife-grade polyester adhesive for professional stone fabrication and local repair enquiries. Supplied with matched hardener.
- Available colours
- Black · White · Beige · Transparent
- Pack capacities
- 1L4L20L
- Companion products
- Matched hardener & Stone Adhesive Color Paste
Discuss dry interior or protected, nonstructural fabrication work. For structural anchoring, movement joints or water-exposed assemblies, request a suitable system for the specific application.
A SEPARATE SELECTION FOR SINTERED STONE
Sintered Stone
Composite Adhesive
For fabricators reviewing adhesive selection for sintered-stone miter joints, edge details or composite assemblies.
TELL US ABOUT THE BOND
The joint and both bonding faces matter.
- Slab
- Manufacturer, slab type, thickness and finish
- Joint
- Mitered edge, edge strip or composite assembly
- Interface
- Stone-to-stone or stone-to-backing material
Share a joint drawing or clear application photos. Confirm the grade, compatibility, packaging and colour options for this product separately.
A COMPANION FOR MARBLE ADHESIVE
Stone Adhesive
Color Paste
Adjust the colour of the marble adhesive for the surrounding stone and intended joint or repair. Available in twelve colours.
- Grey
- Black
- Iron Oxide Red
- Off-White
- Yellow Ochre
- Beige
- White
- Yellow
- Green
- Dark Brown
- Blue
- Red
Colours are indicative. Confirm against actual samples.
Approve a cured test sample on the actual stone before production. Confirm the addition method and amount with KEDA. Colour paste is a colouring accessory; use the matched hardener for curing.
PREPARE YOUR ENQUIRY
A clearer brief.
A useful discussion.
Share your customer applications or workshop requirements so we can discuss the relevant product and supply options.
- 01
Material & finish
Exact stone or slab, surface treatment and both bonding faces.
- 02
Joint & appearance
Application photos, joint drawing and the colour you want to achieve.
- 03
Market & order
Destination market, preferred capacity and estimated order quantity.
PRODUCT & ORDER QUESTIONS
Before you enquire.
Which colours and pack sizes are available for the marble adhesive?
Knife Grade Polyester Marble Adhesive is available in Black, White, Beige and Transparent, with 1L, 4L and 20L capacities and matched hardener. Share the colour, capacity and quantity required to confirm supply.
Can the colour paste be used with the marble adhesive?
Yes. It is offered as a companion to the marble adhesive. Confirm the addition method and amount, then approve a cured sample for the actual stone. Ask separately about compatibility with other adhesive systems.
Is the marble adhesive interchangeable with the sintered stone adhesive?
Select the product for the actual slab, joint and bonding faces. Marble adhesive compatibility does not establish suitability for a particular sintered stone slab. The sintered stone product requires a separate selection discussion.
What is the minimum order quantity?
Minimum quantities, packaging arrangements and distributor cooperation terms are confirmed for each enquiry. Tell us your market, products, preferred capacity and estimated quantity. Fabricator and contractor orders are considered when they meet the applicable minimum quantities.
LET’S DISCUSS YOUR STONE WORK
Build your fabrication range
with KEDA.
Tell us your market, stone applications and expected quantity. Discuss marble adhesive, colour paste and sintered stone adhesive for your customers or workshop.
Distributor enquiries · Qualifying bulk orders