KEDA CONSTRUCTION CHEMICALS

Sintered Stone Composite Adhesive

Adhesive for Sintered Stone Miter Joints and Edge Fabrication

KEDA Sintered Stone Composite Adhesive is intended for professional bonding work on compatible sintered stone, with a focus on 45° miter joints and fabricated edge details. It is positioned for countertop and furniture fabricators reviewing an adhesive for a specific slab and joint design.

Request a Quote View Parameters

Product Values

Sintered Stone

Miter Joints

Edge Fabrication

Sample-Led Approval

Technical Parameters

Product technical parameters
Product Type	Sintered stone fabrication adhesive
Chemical Base	Specify for selected formulation
Components / Mixing Ratio	Specify for matched components
Working Time	Set by formulation and processing conditions
Tensile / Shear Strength	Set by actual slab and joint test
Cured Appearance	Approve on a representative sample

Application & Packaging

Application Areas

Approved edge build-ups and related edge-bonding work.
Sample fabrication to assess joint appearance and the proposed production method.

Suitable Substrates

The actual sintered stone, backing and prepared miter-joint surfaces.

Packaging

Pack format: Container with matched components as required
Illustrated capacity: 1 L main container
Carton quantity: Order-specific

Usage Instructions

Review and dry-fit. Check the slab manufacturer's fabrication guidance, joint geometry, supports and clamps. Avoid forcing misaligned pieces together.
Prepare the bond faces. Remove contamination using an approved method and meet the required surface and moisture conditions. Do not remove factory mesh or coatings, roughen a decorative face or use aggressive solvents without specific approval.
Complete a representative trial. Assess the intended preparation, adhesive, joint and finishing process together. Obtain the required bond-performance evidence; visual inspection alone is insufficient.
Prepare the adhesive as instructed. If mixing is required, use only the specified matching components and ratio, including whether it is measured by mass or volume. Do not borrow another adhesive's hardener or alter its dosage to force a faster cure.
Assemble within the confirmed working time. Apply the adhesive and maintain the specified joint contact and bond-line thickness. Support and secure the pieces without excessive stress or squeezing the joint dry.
Allow the required cure. Follow the separate requirements for releasing fixtures, machining, handling and service loading. Finish and remove residues only by methods approved for both the adhesive and the slab surface.

FAQ & Limitations

Is this the same as marble adhesive or epoxy structural adhesive?

Do not assume that these products are interchangeable. Select an adhesive for the actual material, joint geometry and service conditions. Approval on marble does not automatically establish compatibility with a particular sintered stone slab.

Is it a two-component epoxy, and what is the mixing ratio?

The product image does not establish the chemistry, component count or mixing ratio. Obtain the confirmed instructions for the actual supplied product. Do not infer a 1:1 ratio, a percentage of hardener or a ready-to-use system from the packaging illustration.

Can it bond sintered stone to aluminium honeycomb or timber?

That application needs separate assessment. Identify both bonding surfaces, panel size, backing treatments, support design and expected moisture or temperature exposure. Suitability for a small miter joint is not approval for a large composite panel.

Can I use it outdoors?

Outdoor suitability has not been established in this draft. Confirm the adhesive and complete assembly for the intended exposure before specifying it. The slab's own weather resistance is not evidence of the adhesive joint's durability.

KEDA PRODUCT ENQUIRY

Discuss Your Sintered Stone Project

Share your materials, application, performance requirements, preferred packaging and expected quantity. KEDA can propose a suitable product configuration for Sintered Stone Composite Adhesive.

KEDA Sintered Stone Composite Adhesive